EF. B-23904

Make: SIDEL
Type: SBO 10 SERIES 2
Year of construction: 1999
Working hours : 48500
Quick Change mould system: NO
moulds with the machine: 0,5 Lt
No chiller
machine still in production


BLOWING STATION
Number of molds: 10

OVEN

Oven type : linear
Number of heating modules : 10
Number of heating zones per module : 9
(including lamps in zone 1: 3,000 W and body lamps: 2,500 W)

CONTROL CONSOLE
Industrial PC running Windows NT - Intel Pentium - 15"1 touch sensitive color screen - Modem


CONSUMPTIONS
(estimated for a 1.5 l mineral water bottle, at 14,000 bph)

Air (with 34 mm bell shaped blowing nozzle)

Volume bouteille (litres) 1,5

Compressed air consumption (Nm3/h)
Flow rate of command air (1) (7 b) 191
Flow rate of blowing air (35 b) 1088

Electricity

Oven ventilation on preforms and lamp tips
Ventilation (Nm3/h) : 13,100

400 V (+6 % - 10 %, threephase 50/60 Hz + earth without neutral
Total consumed energy (kWh) 88

Water

Cooling of neck protection ramps(2)
Flow (m3/h) : 3 Max. water temp. (max input/ouput deviation: 10°C) : 20°C

Cooling of mold bodies and bases(2)
Flow (m3/h) : 10.5 Max. water temp. (max input/ouput deviation: 3°C) : 12°C

(1) Strectching command, blowing nozzle command, peripheral devices command.
(2) Water pressure at machine infeed : 5 to 6 bars  p = 4 bars (average) (at 24°C room temperature).

DIMENSION LIMITS

Preform neck Height : 7 to 41 mm Int. diameter: 19 to 43 mm

Preform support ring Diameter : 22 to 48.5 mm
Preform body Length under neck ring : 50 to 145 mm (including inj. gate) Diameter under neck ring : 20 to 40 mm

Bottles Diameter : 50 to 115 mm (Cyl. GUPM) or 130 mm (Square GUPM) Height under neck ring : 100 to 340 mm
Capacity : 0.2 l. to 2.25 l. (Cyl. GUPM) or 3 l. (Square GUPM)

 

 

 

---